Inslogic ABS-Like Pro Resin is a versatile, high-performance 3D printing material formed to deliver high resolution, durability, and consistency. With a refined matte surface finish, it is ideal for general modeling and funtional applications.

Engineered with an improved chemical formula based on Acrylonitrile Butadiene Styrene (ABS), this resin offers outstanding mechanical properties, making it suitable for wide applications including functional prototypes and industrial engineering. 

ABS-Like Pro Resin allows for drilling holes in intricate or delicate prints, giving toughness, impact resistance, and strength.

• Net Weight: 1 kg (35.27 oz)
• Container Weight: 205 ±7 g
• Tensile Strength: 28 MPa
• Flexural Strength: 35 MPa
• Flexural Modulus: 1046 MPa
• Density: 1.17 g/cm3 at 23 ℃
• Viscosity: 300-600 mPa.s at 25 ℃
• Shore D Hardness: 80D

*All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature. Certain specifications may be subject to change without prior notice.

• Shake and stir well before printing.
• Keep containers closed when not in use.
• Store in a cool, dry, well-ventilated place. Store away from sources of heat or ignition.
• Wear nitrile gloves and eye protection when handling, moving, or using this product.
• This resin can be poured back from the vat into the bottle once your print is finished.
• Keep resin away from children, pets, food and beverages.
• Prevent contact with skin, eyes, and mouth. If contact occurs, wash with plenty of water. If irritation persists, get medical advice/attention.
• DO NOT dump resin, cure it, and dispose of contents/container in accordance with local/regional/national regulations.

* Learn more about resin printing safety, please refer to the material safety data sheet (SDS).

• Technical Data Sheet (TDS)
• Safety Data Sheet (SDS)