Dental Model Resin is engineered for the production of high-accuracy restorative models. This resin offers low shrinkage and low odor, meeting the accuracy and dimensional stability requirements of restorative dentistry. It is perfect for modeling dental models, aligner models, gums, teeth, crowns, and bridge models with removable dies.

The finished surface of the models is smooth and scratch-resistant. We produce consistent quality products that you can count on, serving as a reliable partner in your dental practice’s workflow.

Dental Model Resin is versatile and easy to use, compatible with LCD, SLA, and DLP 3D printers ranging from 385 nm to 405 nm. 

* The resin is intended for modeling purposes only and not for intraoral use. 

* Notice: Resin bottle label and color name have been optimized. Bottles with either label will be shipped randomly.

• Net Weight: 1 kg (35.27 oz)
• Container Weight: 205 ±7 g
• Weight of Container & Its Contents: 1.19-1.21 kg
• Tensile Strength: 45 MPa
• Flexural Strength: 75 MPa
• Flexural Modulus: 1821 MPa
• Density: 1.17 g/cm3 at 23 ℃
• Viscosity: 425 mPa.s at 25 ℃
• Shore D Hardness: 83D

*All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature. Certain specifications may be subject to change without prior notice.

• Diagnostic models
• Presentation models
• Models with dies
• Wax-up models
• Educational purposes

• Shake and stir well before printing.
• Keep containers closed when not in use.
• Store in a cool, dry, well-ventilated place. Store away from sources of heat or ignition.
• Wear nitrile gloves and eye protection when handling, moving, or using this product.
• This resin can be poured back from the vat into the bottle once your print is finished.
• Keep resin away from children, pets, food and beverages.
• Prevent contact with skin, eyes, and mouth. If contact occurs, wash with plenty of water. If irritation persists, get medical advice/attention.
• DO NOT dump resin, cure it, and dispose of contents/container in accordance with local/regional/national regulations.

* Learn more about resin printing safety, please refer to the material safety data sheet (SDS).

• Safety Data Sheet (SDS)