Inslogic Dental Implant Model Resin is designed for high accuracy and low shrinkage. Its dimensional stability replicates precise prosthetics, dental structures, and bridges, resulting in smooth-fitting implants and dies. This resin delivers a higher success rate for complex prints, making it ideal for various dental models.

Printed parts can be easily trimmed to achieve optimal fitting for implant applications. This resin is suitable for creating robust jigs, fixtures, and functional parts that can withstand drilling without breaking.

Performs optimally on DLP 3D printers equipped with 385nm to 405nm UV light and is also compatible with monochrome LCD printers in the same range.

*The resin is intended for modeling purposes only and not for intraoral use.

• Net Weight: 1 kg (35.27 oz)
• Container Weight: 205 ±7 g
• Weight of Container & Its Contents: 1.19-1.21 kg
• Tensile Strength: 25 MPa
• Flexural Strength: 35 MPa
• Flexural Modulus: 956 MPa
• Density: 1.1000±0.03 g/cm3 at 23 ℃
• Viscosity: 700-1500 mPa.s at 25 ℃
• Shore D Hardness: 75D

*All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature. Certain specifications may be subject to change without prior notice.

• Accurate removable dies and base of alveolar model
• Replicate precise prosthetics, dental structures, and bridges
• Orthodontic models
• Study models

• Shake and stir well before printing.
• Keep containers closed when not in use.
• Store in a cool, dry, well-ventilated place. Store away from sources of heat or ignition.
• Wear nitrile gloves and eye protection when handling, moving, or using this product.
• This resin can be poured back from the vat into the bottle once your print is finished.
• Keep resin away from children, pets, food and beverages.
• Prevent contact with skin, eyes, and mouth. If contact occurs, wash with plenty of water. If irritation persists, get medical advice/attention.
• DO NOT dump resin, cure it, and dispose of contents/container in accordance with local/regional/national regulations.

* Learn more about resin printing safety, please refer to the material safety data sheet (SDS).

• Safety Data Sheet (SDS)